Electric Bike Travel: The Art of Safety Checks and Preparations
With the progress of science and technology and the improvement of environmental awareness, electric bikes have become the daily travel choice of more and more people. As a convenient and environmentally friendly means of transportation, electric bikes are playing an increasingly important role in life. However, to ensure the safe travel of electric bikes, we need to do a good job of adequate inspection and preparation. In this article, we will ride an electric bike before going out to do the check and preparation work as the theme, to explore how to ensure the safe travel of electric bikes.
Electric bike check: focus on details to ensure safety
1. Seat check: The height of the saddle and handlebar should be adjusted before the use of the electric bicycle to ensure the comfort of riding and reduce fatigue. The height of the saddle and handlebar should be different from person to person. Generally, the height of the saddle is suitable for the rider to be able to reliably land on the ground with one foot (the whole bike should basically remain upright), and the height of the handlebar is suitable for the rider to put the small arm flat and relax the shoulder and arm. However, The most important thing is that the saddle and handlebar adjustment should first ensure that the insertion depth of the tube and riser must be higher than the safety mark line.
2. Brake check: Start by visually inspecting the brake pads for wear and removing any debris lodged between them and the wheel. Next, test each brake lever, ensuring they engage smoothly and return to their position. Lift the wheels off the ground to spin and apply the brakes, checking for prompt stops without unusual sounds. For hydraulic brakes, verify the brake fluid level. Confirm brake pad alignment and, finally, take a short test ride, practicing emergency stops to ensure optimal braking performance.
3. Battery check: The battery is the power source of the electric bike. The battery condition is directly related to the bike's mileage and safety. Therefore, before going out on an electric bike, we need to check the battery's power, charging status, and whether there is leakage, deformation, aging, and other phenomena. For lead-acid batteries, the height of the electrolyte should be checked regularly to ensure that it is within the prescribed range; while for lithium-ion batteries, the state of charge and life should be checked to avoid the impact of traveling due to battery failure.
4. Motor check: The motor is the heart of the ebike, and its performance directly determines the acceleration performance and riding range of the bike. Before going out on the ebike, we need to check the bearings, gears, and motor wires of the motor to make sure they are intact. At the same time, we should make sure that the connection between the motor and the controller is normal, as well as the lubrication inside the motor. If the motor is found to be faulty or abnormal, it should be stopped and repaired immediately.
5. Frame and Wheel Inspection: The stability and integrity of the frame and wheels are crucial to the riding safety of the electric bike. We need to check whether the frame is rusted, broken, or deformed, and make sure the tire wear of the wheels is within the specified range. For ebikes, we also need to check whether the steering handle is flexible and whether the brakes are sensitive. If the frame or wheels are found to be faulty or abnormal, they should be stopped immediately and repaired or replaced.
6. Charger check: The charger is one of the indispensable accessories of the ebike, and its normal or not is directly related to the charging status of the battery. Before going out on the ebike, we need to check whether the cable of the charger is intact, whether the plug is clean and dust-free, and whether the heat dissipation performance of the charger is good. If the charger is found to be faulty or abnormal, it should be stopped immediately and repaired or replaced.
The preparations before going out: careful planning, traveling comfortably
1. Preparation of safety equipment: Before going out on an electric bike, wearing a safety helmet is the most basic security measure. The helmet can protect the head from collision and injury, reducing the risk of accidents. In addition, it is also necessary to wear a reflective undershirt or clothing with reflective strips to improve visibility in low-light environments and reduce the risk of accidents. For rainy or foggy weather, equipment such as waterproof clothing and anti-fog glasses should also be prepared.
2. Planning of riding paths: Before traveling, you should plan your riding paths in advance to avoid congested roads and high-risk areas. Use map software or navigation equipment to understand road information, traffic rules, and riding routes, so as to reasonably arrange travel time. At the same time, understand the parking regulations of your destination to ensure that your bike is parked safely and reliably. When planning riding paths, you should pay attention to avoiding peak hours and congested roads as much as possible and choose safe and smooth roads to ride.
3. Preparation of emergency tools: In order to cope with possible emergencies, we should carry some emergency tools, such as spare tires, repair tools, inner tubes, tire repair tools, screwdrivers, and so on. In addition, for electric bicycles, you should also prepare foot pedals in case of emergency. These emergency tools can be used in case of bike malfunctions or accidents, to help us solve the problem and move on.
4. Riding Precautions: In the process of riding, the following points should be noted: first of all, we should comply with traffic rules, do not run red lights, do not go against the traffic, do not occupy the motorway and sidewalks; secondly, we should keep the distance between the ebikes; once again, we should control the speed of the ebike in the prescribed range, especially in the areas of dense traffic or narrow roads; finally, we should avoid the emergency braking, sharp turns, and other dangerous operations, and be sure to slow down when making sharp turns. These precautions can help us ride ebikes safely and avoid accidents. Pay attention to reasonable speed control to avoid speeding, especially in rainy and hazy weather and other reduced visibility, maintain a safe distance, and pay attention to changes in road conditions in order to cope with unexpected situations.
5. Understand the weather: Before leaving home, you should pay attention to the weather forecast to understand the weather conditions of the day, especially the temperature changes and the probability of rainfall in order to take the appropriate protective measures, for example, in the rainy day travel should wear waterproof clothing and anti-fog glasses and other equipment, and to avoid riding in the deeper water section to avoid accidents, and also to understand the weather of the destination in order to do the appropriate travel arrangements and protective measures.
6. Do a good job of trip planning: Before leaving, you should do a detailed trip planning, including travel time, route planning, and destination parking places, especially in unfamiliar places, you should use map software or navigation equipment in advance to understand the specific location of the destination and traffic conditions, but also according to the trip planning, arrange reasonably for charging time and charging locations to ensure that the electric bike can be charged in a timely manner to meet the demand for riding.
7. Maintain good health: Last but not least, you should pay attention to your health condition before you go out. If you have any symptoms of discomfort or are not feeling well, it is recommended that you make reasonable arrangements for rest, because riding for a long period of time may have certain effects on your body.
Detailed inspection and preparation before going out on an ebike can ensure a safe and smooth trip, avoiding safety hazards caused by bike failure or insufficient power, so it is recommended to spend some time on the necessary inspection and preparation before going out. At the same time, Lacros offers suitable helmets, different bags, multi-functional bicycle repair tools, and other accessories for you, so you can explore the world by equipping these accessories, adding more convenience to your riding life.